Electrolysis Totally Explained

Everything about Electrolysis totally explained

ť This article is about the chemical process. For the cosmetic hair removal procedure, see Electrology.

In chemistry and manufacturing, electrolysis is a method of separating chemically bonded elements and compounds by passing an electric current through them.

Overviews

Electrolysis involves the passage of an electric current through, in general, an ionic substance that's either molten or dissolved in a suitable solvent, resulting in chemical reactions at the electrodes. The positive electrode is called the anode, and the negative electrode is the cathode. To be useful for electrolysis, the electrodes need to be able to conduct electricity, and metal electrodes are generally used. Graphite electrodes and semiconductor electrodes are also used. An ionic compound (or covalently bonded in the case of acids) is dissolved with an appropriate solvent, or melted by heat, so that its ions are available in the liquid. An electrical current is applied between a pair of electrodes immersed in the liquid. Each electrode attracts ions that are of the opposite charge. Therefore, positively-charged ions (called cations) move towards the cathode, whereas negatively-charged ions (termed anions) move toward the anode. The energy required to separate the ions, and cause them to gather at the respective electrodes, is provided by an electrical power supply. At the electrodes, electrons are absorbed or released by the ions, forming a collection of the desired element or compound. Oxidation of ions or neutral molecules can take place at the anode, and the reduction of ions or neutral molecules at the cathode. For example, it's possible to oxidize ferrous ions to ferric ions at the anode: ť

mathrm

ions are fairly common in acidic solutions. In alkaline solutions, reactions involving

OH^-

(hydroxide ions) are common.
   The substances oxidised or reduced can also be the solvent (usually water) or the electrodes. It is possible to have electrolysis involving gases. For instance, fuel cells often use oxygen and hydrogen gases as reactants.
   The amount of electrical energy that must be added equals the change in Gibbs free energy of the reaction plus the losses in the system. The losses can (in theory) be arbitrarily close to zero, so the maximum thermodynamic efficiency equals the enthalpy change divided by the free energy change of the reaction. In most cases, the electric input is larger than the enthalpy change of the reaction, so some energy is released in the form of heat. In some cases, for instance, in the electrolysis of steam into hydrogen and oxygen at high temperature, the opposite is true. Heat is absorbed from the surroundings, and the heating value of the produced hydrogen is higher than the electric input.
   The following technologies are related to electrolysis:

Electrochemical cells, including the hydrogen fuel cell, use the reverse of this process.
Gel electrophoresis is an electrolysis wherein the solvent is a gel: It is used to separate substances, such as DNA strands, based on their electrical charge.

Electrolysis of water

ť 2H₂O_(l) → 2H_2(g) + O_2(g)

This has been suggested as a way of shifting society toward using hydrogen as an energy carrier for powering electric motors and internal combustion engines. (See hydrogen economy.)
Electrolysis of water can be observed by passing direct current from a battery or other DC power supply through a cup of water (in practice a saltwater solution increases the reaction intensity making it easier to observe). Using platinum electrodes, hydrogen gas will be seen to bubble up at the cathode, and oxygen will bubble at the anode. If other metals are used as the anode, there's a chance that the oxygen will react with the anode instead of being released as a gas. For example, using iron electrodes in a sodium chloride solution electrolyte, iron oxide will be produced at the anode, which will react to form iron hydroxide. When producing large quantities of hydrogen, this can significantly contaminate the electrolytic cell - which is why iron isn't used for commercial electrolysis.
The energy efficiency of water electrolysis varies widely. The efficiency is a measure of what fraction of electrical energy used is actually contained within the hydrogen. Some of the electrical energy is converted to heat, a useless by-product. Some reports quote efficiencies between 50% and 70%(External Link

) This efficiency is based on the Lower Heating Value of Hydrogen. The Lower Heating Value of Hydrogen is thermal energy released when hydrogen is combusted. This doesn't represent the total amount of energy within the hydrogen, hence the efficiency is lower than a more strict definition. Other reports quote the theoretical maximum efficiency of electrolysis as being between 80% and 94%.(External Link

). The theoretical maximum considers the total amount of energy absorbed by both the hydrogen and oxygen. These values refer only to the efficiency of converting electrical energy into hydrogen's chemical energy. The energy lost in generating the electricity isn't included. For instance, when considering a power plant that converts the heat of nuclear reactions into hydrogen via electrolysis, the total efficiency is more like 25%–40%.(External Link

) About four percent of hydrogen gas produced worldwide is created by electrolysis, and normally used onsite. Hydrogen is used for the creation of ammonia for fertilizer via the Haber process, and converting heavy petroleum sources to lighter fractions via hydrocracking.

Experimenters

Scientific pioneers of electrolysis included:

Lavoisier

Adolph Wilhelm Hermann Kolbe

William Nicholson

Joseph Louis Gay-Lussac

Alexander von Humboldt Pioneers of batteries:

Alessandro Volta More recently, electrolysis of heavy water was performed by Fleischmann and Pons in their famous experiment, resulting in anomalous heat generation and the controversial claim of cold fusion.

Faraday's laws of electrolysis

First law of electrolysis

In 1832, Michael Faraday reported that the quantity of elements separated by passing an electrical current through a molten or dissolved salt is proportional to the quantity of electric charge passed through the circuit. This became the basis of the first law of electrolysis:

m = k cdot q

Second law of electrolysis

Faraday also discovered that the mass of the resulting separated elements is directly proportional to the atomic masses of the elements when an appropriate integral divisor is applied. This provided strong evidence that discrete particles of matter exist as parts of the atoms of elements.

Industrial uses

Production of aluminium, lithium, sodium, potassium

Production of hydrogen for hydrogen cars and fuel cells; high-temperature electrolysis is also used for this

Coulometric techniques can be used to determine the amount of matter transformed during electrolysis by measuring the amount of electricity required to perform the electrolysis

Production of chlorine and sodium hydroxide

Production of sodium and potassium chlorate

Production of perfluorinated organic compounds such as trifluoroacetic acid Electrolysis has many other uses:

Electrometallurgy is the process of reduction of metals from metallic compounds to obtain the pure form of metal using electrolysis. For example, sodium hydroxide in its molten form is separated by electrolysis into sodium and oxygen, both of which have important chemical uses. (Water is produced at the same time.)

Anodization is an electrolytic process that makes the surface of metals resistant to corrosion. For example, ships are saved from being corroded by oxygen in the water by this process. The process is also used to decorate surfaces.

A battery works by the reverse process to electrolysis. Humphry Davy found that lithium acts as an electrolyte and provides electrical energy.

Production of oxygen for spacecraft and nuclear submarines.

Electroplating is used in layering metals to fortify them. Electroplating is used in many industries for functional or decorative purposes, as in vehicle bodies and nickel coins.

Production of hydrogen for fuel, using a cheap source of electrical energy.

Electrolytic Etching of metal surfaces like tools or knives with a permanent mark or logo. Electrolysis is also used in the cleaning and preservation of old artifacts. Because the process separates the non-metallic particles from the metallic ones, it's very useful for cleaning old coins and even larger objects.

Further Information

Get more info on 'Electrolysis'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://electrolysis.totallyexplained.com">Electrolysis Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.